Twinwall Utility Duct Electric - 94mm (I.D.) x 6mtr Black

Our black twin wall ducting is used for ducting all kinds of electrical installations. It is available in 94mm and 137mm size options, in 6m lengths. Other sizes are available in our ENATS approved version. The diameter measurements refer to the inside diameters (I.D.). All dimensions can be found in the table alongside the product image.

Twinwall rigid duct is much stronger than flexible duct which makes it ideal for use beneath roads and pathways, or where a deeper underground installation is required. The ribbed external wall ensures that the duct can withstand high compressive forces whilst the smooth inner bore resists any snagging.

You should always choose a diameter that allows plenty of room within the duct to allow the cable or cables to be drawn through smoothly.

All lengths come with an integral coupler, which enables two lengths to be connected together as required.

6 metres is the standard length for rigid ducting used underground, minimising the amount of joints that are needed.

Twinwall duct is made from HDPE (High Density Polyethylene), which is both strong and resistant to corrosion. Like our flexi duct, it is designed to meet the current compressive strength requirement of the Highways Agency.

For further information about duct installations please visit our guides and tips section.